Free sample for Wafer Bonding Pressure Film - Pressure Measurement Film 1/2/3/4/5LW MW MS

Free sample for Wafer Bonding Pressure Film - Pressure Measurement Film 1/2/3/4/5LW MW MS – Lucky Innovative

Short Description:

Product Detail

Product Tags

Feedback (2)

Our enterprise insists all along the standard policy of "product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as consistent purpose of "reputation first, client first" for Id Card Magnetic , Portable Photosensitive Dry Film , High Coercivity Magnetic Stripe , We hope to establish additional organization interactions with prospects all over the entire world.

Free sample for Wafer Bonding Pressure Film - Pressure Measurement Film 1/2/3/4/5LW MW MS – Lucky Innovative Detail:

Product video

Product list

Product code	Width	Length	Pressure Range(Mpa)	Type
Ultra Extreme Low Pressure 5LW	310mm	2m	0.006-0.05	Two sheet
Extreme Low Pressure 4LW	310mm	3m	0.05-0.2	Two sheet
Ultra-Super Low Pressure 3LW	270mm	5m	0.2-0.6	Two sheet
Super Low Pressure 2LW	270mm	6m	0.5-2.5	Two sheet
Low Pressure 1LW	270mm	10m	2.5-10	Two sheet
Medium Pressure (MW)	270mm	10m	10-50	Two sheet
Medium Pressure (MS)	270mm	10m	10-50	Mono-sheet

Applications

Pressure Measurement Film is widely used in the area of Electronics circuit, LCD, Semiconductors,Automotive, Lithium-ion battery and Installation of mechanical equipment,etc.

Product Features

(1) Precisely measure pressure,pressure distribution and pressure balance .
(2) Contact pressure shown with differing concentrations of color can even be converted into numbers by calculation.
(3) Quick measurement,gives a clear and visual picture.

Product Specification

Item	The film	K movie
Package	Black poly bag	Blue poly bag
Winding direction	Coating on inner side	Coating on outside
Film color	Cream white(light pink)	White
Thickness	1/2/3LW: 95±10µm 4/5LW: 90±15µm MW: 85±10µm	1/2/3LW: 90±15µm 4/5LW: 85±15µm MW: 90±15µm
Precision	±10% or less (measured by densitometer at 23℃,65% RH)
Recommend temperature	1/2/3LW,MW: 20℃-35℃ 4/5LW: 15-30℃
Recommend humidity	1/2/3LW,MW:35%RH-80%RH 4/5LW:20%-75%RH

Item	MS film	PET Protection Film
Package	Black poly bag	Inside the roller
Winding direction	Coating on inner side	No coating
Film color	Cream white(light pink)	Transparent
Thickness	105±10µm	75µm
Precision	±10% or less (measured by densitometer at 23℃,65% RH)
Recommend temperature	20℃-35℃
Recommend humidity	35%RH-80%RH

Product Structure

TWO-SHEET:

Pressure Measurement Film (1)

MONO-SHEET:

Pressure Measurement Film (2)

Working Principle
Face the coated sides of L-Sheet and K-Sheet, apply pressure, the microcapsules of L-Sheet are broken,color forming material of L-Sheet reacts with color developing material of K-Sheet, red color appears. The damage degree of microcapsules is according to pressure level. The greater the pressure, the greater the damage of microcapsules and the higher the color density. On the other hand, the lower the color density.

Storage

(1) Avoid direct sunlight ,away fire in original packaging.
(2) Storage the film below 15℃.
(3) Keep unused film in the black and blue poly sacks and store then in a box.

Product detail pictures:

Related Product Guide:

Our advancement depends on the superior gear ,superb talents and consistently strengthened technology forces for Free sample for Wafer Bonding Pressure Film - Pressure Measurement Film 1/2/3/4/5LW MW MS – Lucky Innovative , The product will supply to all over the world, such as: Czech Republic , Boston , Slovakia , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Color Changing Paper